Kamis, 16 Desember 2010

Aston Martin One-77 to make 750-hp


Aston Martin today confirmed that the 2011 Aston Martin One-77 will be powered by a 7.3L V12 engine making a certified 750-hp and a maximum torque of 553 lb-ft.

Click here for more news on the Aston Martin One-77.

“The One-77 is approaching a production reality and of course, there is considerable excitement in the project,” said Dr. Ulrich Bez, Chief Executive of Aston Martin. “Now the next steps are all about details and refinement to complete the composition. I know the final car will demonstrate what the Aston Martin team is capable of.”

Deliveries of the Aston Martin One-77 are scheduled to begin in early 2011.

Follow the jump for the press release and the fourth part of the One-77 film series.

Refresher: Power for the Aston Martin One-77 comes from a 7.3L V12 producing more than 750-hp and a peak torque of 553 lb-ft. The engine is mated to a new 6-speed gearbox that allows the One-77 to go from 0 to 60 mph in 3.5 seconds with a top speed of over 200 mph. Only 77 units of the One-77 will be made.

Aston Martin One-77 – New Specs


Aston Martin One-77 definitive sports car, one that epitomises everything Aston Martin from technology, the hand-craftsmanship of the hand rolled aluminium panels to the attention to detail.

Dr. Ulrich Bez, Chief Executive of Aston Martin said “The One-77 is approaching a production reality and of course, there is considerable excitement in the project,” and “Now the next steps are all about details and refinement to complete the composition. I know the final car will demonstrate what the Aston Martin team is capable of.”

Some beautiful detailed One-77 exterior, on the side mirror mounts molded into the door shells and close-ups of the wraparound jewel-like tail light. Aston points out that the Gaydon-built One-77 is subject to the same thorough development programme as the rest of the range.

Chris Porritt, One-77 Programme Manager said, “We wanted to create something that wows you as much when you see what’s under the skin as the exterior styling itself. We started by identifying the most technologically exciting front-engined, rear-wheel drive cars in the world: those from the DTM race series. We then applied the principles and technology that feature heavily in their design and translated it to a road car application.”

Kamis, 30 September 2010

debut for Range Rover’s new leaner, greener flagship SUV

Range Rover is taking a leaf out of Lotus’ book and adding lightness to its new flagship off-roader to dramatically improve fuel efficiency. The next generation of Range Rover is due to arrive this time in 2012, and will feature all-alloy construction for the first time.

The aluminium chassis will draw on Jaguar’s experience when building the current XJ. However, Land Rover’s engineers have done so much work to reinforce the car’s underpinnings and monocoque bodyshell that the firm calls it a separate platform. The chassis will also underpin the next Range Rover Sport, which currently uses the Discovery's mechanicals.

The Range Rover will become the world’s first all-alloy off-roader, ensuring that the newcomer stays ahead of the pack. The firm is targeting a weight cut of over 400kg, taking the kerbweight closer to 2,100kg.

As you can see from this engineering prototype, the newcomer’s wheelbase doesn’t change much from the current model. The finished car will feature a slightly longer set of dimensions in both the wheelbase and track, to liberate extra room inside.

And while the current car’s interior is among the best available on any luxury vehicle, the next Range Rover will feature a more spacious cabin, particularly in the rear, and a hike in quality of materials, fit and finish.

Designed by Gerry McGovern, the new Range Rover will feature the clamshell bonnet, floating roof and jewel-like lights of the current car, albeit with a lower roof and rounder front end to improved aerodynamics.

Engines will begin with improved TDV6 and TDV8 diesels which get stop-start for the first time, mated to an improved eight-speed auto gearbox. Petrol units will follow shortly after launch, followed by a diesel-electric hybrid.

Off-road performance will still be exemplary, with the latest generation of the firm’s Terrain Response system controlling the power delivery to keep you going whatever the landscape throws at you.

Jumat, 30 Juli 2010

Replacement Front Front Pipe NATURAL FINISH -- 30 in. L x 4 in. W x 3 in. H; Header pipe from exhaust manifold

Replacement Front PipeReplacement Front Front Pipe - Natural, Steel, Direct OE replacement
Part Number: REPM961901
Manufacturer Number: REPM961901
Replacement Front Pipe Replacement Front Pipe
List Price: $291.96
Our Price: $118.21
You Save: $173.75
Free Shipping
Info/Buy
FRONT PIPE, ALUMINIZED STEEL, NATURAL FINISH -- 30 in. L x 4 in. W x 3 in. H; Header pipe from exhaust manifold to catalytic converter; A high quality, direct fit OE replacement front pipe; Features one-piece design that eliminates labor-intensive pipe bending, welding, and cutting; Engineered to provide excellent exhaust performance; Easy installation.

Rabu, 09 Juni 2010

Ford Mustang Shelby GT500

a front view of the 2011 Ford Mustang Shelby GT500.

Just the fastest production Mustang ever, and the quickest, with some serious upgrades from the substantially revised 2010 GT500.

The improvements start under the hood, where the GT500 retains the 5.4-liter V8 developed for the Ford GT supercar, rather than adopting a variation of the new 5.0-liter V8 introduced in the standard 2011 Mustang GT. Horsepower increases by 10 from the 2010 GT500, to 550 hp at 6,200 rpm (peak torque holds at 510 lb-ft), but that's a relatively minor part of the story. The 2011 GT500 gets a new aluminum engine block, cast by Honsel in Germany and finished with a metallurgical process called Plasma Transfer Wire Arc. Steel cylinder liners are sprayed in under extreme pressure at 35,000 degrees Fahrenheit, then machined to a thickness of 150 microns.

As result, the 2011 block weighs 102 pounds less than the previous cast-iron block. Other weight (and fuel) savers include an electric power-steering pump. Charge cooling capacity for the Roots-type supercharger increases 40 percent, thanks to a larger, two-layer intercooler. Bottom line, the GT500's curb weight drops 120 pounds compared with the 2010, to 3,820 pounds. Nearly all of the reduction comes over the front axle in what is a nose-heavy car.

The 2011 GT500 also has aerodynamic improvements and sound-dampening refinements that reduce interior noise levels 20 percent, according to Ford. For the first time, it offers an optional Performance Package developed from the limited-run 2009 GT500 KR. The package includes a limited-slip differential with a shorter 3.73 gear, stiffer springs that lower ride height slightly, forged wheels, Goodyear's latest-gen Eagle F1s (255/40Z-19 front, 285/35ZR-20 rear), and unique, thinner hood stripes.

The 2011 GT500 is available now, starting at $49,495 for the coupe, including the $850 destination charge. Options include the Performance Package ($3,495), a glass roof ($1,995), a navigation/electronics package ($2,340), and Ford's Shaker 1000 audio upgrade ($1,295).

"I think the value here is unprecedented," says Jamal Hameedi, chief program engineer at Ford's Special Vehicle Team. "We're delivering supercar performance for under $50,000."

How's it drive?

The 2011 GT500 drives like ticket bait on the street, and like the fastest Mustang ever on a track. With another short reload on substantive improvements, the big swinging Mustang buries old-school pony-car shortcomings deeper in the past.

Ford's track numbers speak for themselves: 0-60 mph, 4.2 seconds; quarter-mile, 12.3 seconds at 119 mph; skid pad, 1.01 g; 60 mph-0, 106 feet. It's more than five seconds faster than the 2010 GT500 around the full 3.2-mile circuit at Virginia International Raceway. Yet the track numbers only begin to explain how much better the 2011 GT500 is than its predecessor.

The 2011 floats and drifts less readily than the 2010. It understeers less. It's generally better balanced and it has even more grip (thanks, presumably, to Goodyear's latest compounds or construction). In sport mode, its stability electronics seem more progressive.

The GT500 remains a big, heavy, wide car. It takes some familiarity to get comfortable about exactly where its edges are. But it's also quite predictable and easily manageable, even for less-accomplished drivers. Momentum is not necessarily critical in this car. The brakes are strong enough and the torque band so broad that it will cover up a lot of mistakes. You can mess up a corner, scrub off most of your speed and still count on the torque to get you flying again.

Clutch action is definitely not stiff but the pedal isn't resistance-free mush, either. It's just about right. The shifter is firm and tight--one of those single-digit salutes to the pony cars of yore. Steering is probably the element we enjoyed least. It still feels lighter than a lot of European performance cars, with a hint more wanderlust. It's not particularly quick.

On the road, third gear will get you almost anywhere you want to go, once the GT500 is rolling. The flow of torque seems almost limitless. We wouldn't guess many enthusiasts will be chugging around at 2,200 rpm, however. From midrange up, the GT500 sounds fantastic, but never intrusive. We commend SVT for its exhaust tuning.

Ford's performance group seems particularly proud that the 2011 GT500 is the first without a gas-guzzler tax (delivering 15 mpg city, 23 mpg highway, according to the EPA). Of course, top gear in the Tremec six-speed has a way-tall 0.5 ratio. It's good for fuel economy, but few enthusiasts will have the restraint to use it often, unless the day's journey covers a few hundred miles of interstate.

Do I want it?

Who among the Mustang faithful wouldn't want the fastest and arguably best Mustang ever? The 2011 GT500 is fabulously fast, ruggedly handsome and imposingly obvious. It has leading-edge technologies that pony cars aren't necessarily supposed to have. We'd guess, though, that the Performance Package might be a tad stiff on what passes for pavement in places like greater Detroit or eastern Pennsylvania.

As for value, you won't find 550 hp on a new-car lot for less cash. Then again, one might consider a base LS3 Chevrolet Corvette coupe. It has a nearly identical retail price (as of 2010), only a slight power-to-weight disadvantage and even better EPA ratings than the new GT500.

Closer to home, the 2011 Mustang GT 5.0 delivers 412 higher-revving, aluminum-block horsepower hauling 215 fewer pounds than its big brother's supercharged engine, with still better EPA ratings (17 city, 26 highway). And it costs $19,000 less than the new GT500.

Seems like a pretty good deal on the not-quite-the-best Mustang ever.

2011 Ford Mustang Shelby GT500

Price: $48,645 coupe, $53,645 convertible

Available: Now

Layout: Front engine, rear-drive 2+2 coupe or convertible

Drivetrain: 5.4-liter supercharged V8, 550 hp, 510 lb-ft; six-speed manual transmission

Weight: 3,820 lb (coupe)

Performance: 0-60 mph, 4.2 sec; quarter-mile, 12.3 sec @119 mph; skid pad, 1.01 g; 60 mph-0, 106 feet (mfr), 15 mpg city, 23 mpg highway (EPA)

Selasa, 11 Mei 2010

Company offers aftermarket brake override for Toyotas



With all the news reports about issues with unintended acceleration in Toyotas in recent months, it was only a matter of time before an aftermarket company stepped up with a purported solution. Santa Barbara-based Solutions Group Inc. is now marketing a device called the Decelerator, which they claim provides a brake override to prevent the car from taking off on the driver.

We spoke with Sean O'Neil, the CEO of the Solutions Group, to learn more about the Decelerator. The device is another box of electronics that can intercept and modify signals to the engine throttle body from the electronic control unit (ECU). Installation is straightforward. The wiring harness from the ECU to the throttle body is unplugged and connected to device, which is then plugged into the ECU. A second connector goes to the brake pedal switch. The brake pedal input provides the 5 volts needed to power the Decelerator.

Inside the Decelerator is a micro-controller and some firmware that sits idle until the brake pedal is pressed. While the brake is off, there's no power and the pulse-width-modulated (PWM) signal to the throttle body is simply passed through unmodified. Read on to find out what happens after the brake is applied.

Selasa, 09 Maret 2010

Audi Reveals A1 S-Line Sport Package


Just like the BMW Group did with its MINI-branded cars, Audi is planning to offer an amazing amount of customization options and packages for its new entry-level A1 model including the S-Line sport kit which is expected to be one of the most popular options amongst buyers.

Seen here for the first time in official photos, the S-Line kit comprises of two separate packages. The S-Line Exterior package sweetens up the A1's looks with chiseled sill tops, a larger roof spoiler, a more concave front bumper with side air-vents and a new rear bumper with a diffuser and matte optics.

The second kit is called S-Line Sport Package and it adds 17- or 18-inch alloy wheels, a sport suspension with dynamic suspension tuning, leather-wrapped sport steering wheel and sport seats.

And no, none of the available packages offer any performance upgrades for the four engines (two petrols with 86HP and 122HP, and two diesels with 90HP and 105HP) and that will be available at the A1's launch. For more details on the A1 check out our previous stories by clicking here and here.


Design by infinityskins.blogspot.com 2007-2008